How Much Does It Cost to Move a Boiler?
Do you want to know how much it costs to relocate a boiler in your home?
This comprehensive guide covers all labour and material costs associated with relocating a boiler.
Take a look at it below!
How Much Does It Cost to Move a Boiler?
A boiler is commonly stored in attics, garages, or a storage box in another part of the house. We’ll go through the many costs of moving a boiler, such as supply, additional, and labour costs, as well as the duration and benefits of relocating your boiler.
So, if you wish to move your boiler, you’ll discover all the information you need right here. So, how much does it cost to relocate a boiler?
Depending on the materials and labour needed, moving a boiler to a new location might cost anything from £350 to £750. Expect to pay £350 for a few feet of pipe relocation, £500 for a medium amount of pipe relocation, and £750 on average for a large amount of pipe relocation (complete another side of the house, drill through walls, etc.).
The quantity of pipework and general preparation necessary to relocate a boiler determines the cost, not the type of fuel used. Fitters, on the other hand, have a wide range of costs.
You should be concerned only if you have an oil boiler (which normally weighs more than 100kg, compared to 45 kg to 50 kg for a gas or LPG boiler). You should employ a labourer to transport your boiler because it is a large, dangerous, and time-consuming task.
The cost of replacing a central heating boiler ranges from £250 to £500. If it is necessary for the engineer to conduct considerable pipe and/or flue work, expect to pay more.
Expect to pay more if the engineer is required to perform extensive pipe and/or flue work. Moving a boiler incurs costs such as draining the system and relocating pipes and electrical connections. The cost depends on how far your boiler is relocated.
While an existing boiler can be relocated, if it is more than 15 years old, it will almost certainly need to be replaced in the near future.
There’s no need to replace your boiler if it’s only a few years old and still under warranty; instead, it can be relocated. This will cost between £500 and £800, depending on whether a new flue, piping, or other components are necessary.
The price will differ based on the circumstances. For example, if you want to relocate your boiler to a different floor, you’ll need to raise and rebuild the flooring as well as extend the plumbing to the new floor, which would cost between £300 and £700.
If you relocate the flue, you’ll need a new flue to get rid of any waste products from your boiler, and most boiler relocations will require the installation of a new flue, which will cost between £100 and £150.
It is usually less expensive to move it to a different location within the same room than it is to move it to a different room (or floor), which costs around £700–£800.
You’ll need a lot more pipes, floors will need to be lifted, and furniture will almost certainly need to be moved if you choose to move a boiler downstairs instead of having a boiler and a water tank close to each other.
Moving a boiler from upstairs to downstairs typically costs between £900 and £950.
The type of boiler used will also influence the cost. Additional expenses would apply if you also want to transfer your hot water cylinder and/or water tank, which will cost between £2,000 and £3,000 on average for system and conventional boilers.
Your location is equally crucial when it comes to shifting a boiler. Engineers bill at different rates around the country, with expenses in places like the southeast and London being higher than the national average.
On the other hand, regions like the north of England, Scotland, and Northern Ireland have lower rates than the rest of the country.
The cost of flooring varies based on the type. If you have concrete or tiled floors, pipework can be run through walls and ceilings, which adds to labour expenses and can increase material costs if the path is less direct. If a boiler is being put in the attic, scaffolding may be required.
Moving Boiler Prices
The costs of moving a boiler are broken down in the table below.
|Central heating boiler replacement
|£250 – £500
|Relocate an existing boiler
|£500 – £800
|Move your boiler to a different floor
|£300 – £700
|Installation of a new flue
|£100 – £150
|Move boiler downstairs
|£900 – £950
|Moving in the same room
|£700 – £800
|Relocate your hot water cylinder and/or water tank
|£2000 – £3000
What are the supply costs of a boiler relocation?
You might be wondering what you’re paying for when you move your heater around your house. As a result, we’ve established this part to show you solely the supplier costs, without any labour or other charges.
To begin, you should understand how to move a boiler. To comply with rules, gas condensing boilers must be situated a certain distance away from doors or windows. This is required by the minimum flue clearance distance, which states that the flue must be at least 1,200 mm away from an open door or window.
Because a boiler requires access to a waste pipe, a bathroom or utility room is an excellent location. Keep in mind that the greater the distance between the boiler and the waste pipe, the more pipes are needed to connect them.
First, you’ll need a boiler flue, which costs between £40 and £120, and a magnetic central heating filter, which costs between £70 and £130. You’ll also require a variety of screwdrivers.
Depending on what you require, this will cost between £20 and £40. An additional flue pipe is also required. They range from £10 to £80. To be safe, you should invest in a carbon monoxide detector. These are inexpensive and will save your life.
It is recommended that you employ an engineer to relocate your boiler; however, if you want to do it yourself, make sure you understand what you need to do so that you do not damage your current boiler.
The table below breaks out the various supply expenses associated with relocating your boiler:
|£40 – £120
|Magnetic central heating filter
|£70 – £130
|£20 – £40
|Extension flue pipes
|£10 – £80
|Carbon monoxide alarm
|£15 – £30
What are the additional costs of moving a boiler?
Because boilers can be enormous and cumbersome, it’s logical that you’d want to transfer them to less-used and less-visible regions of your home.
However, once you’ve taken this option, you can find yourself facing unexpected costs. As a result, we’ve included this part so that if any unforeseen costs happen, you’ll be prepared and know what to do with the usual boiler moving costs.
You can have your boiler inspected to ensure your safety and to save money over time. But how much does it cost? A boiler service costs between £80 and £90 for a one-time service.
This, however, will differ based on the source and other variables. For a yearly service, you should budget between £150 and £250.
A gas boiler service will cost between £70 and £100, while an oil boiler service will cost between £50 and £200, and an electric combi boiler will cost between £60 and £100. A commercial boiler will set you back around £70 to £90.
Monthly boiler servicing costs £10-£15, with landlord safety certificates costing £60-£90.
Power flushing your boiler to remove any limescale or grime that has developed inside it is another fantastic way to keep it in good working order. If you see any cold areas on your radiators, you should have them cleaned because a blockage could be the cause.
To power flush your heating system, you’ll need to hire a professional heating specialist who will use specialised power cleaning chemicals and equipment to clear out your boiler and make it more efficient. A professional power flush will cost between £400 and £600.
The cost of boiler service jobs will be heavily influenced by labour costs. Although there are usually no supply fees associated with testing and obtaining a Landlord Gas Safety Certificate, you may be responsible for the supply costs as well.
The type and size of the boiler are crucial factors to consider. Accessibility and the condition of the boiler are also important considerations. Boiler servicing takes 30–40 minutes on average, while some boilers and servicing types, such as the CP12, may take longer.
If you have your boiler serviced on a regular basis, its energy efficiency will improve. This is due to the fact that faults can be recognised sooner rather than later and the boiler can be better maintained, resulting in increased total energy efficiency.
For more information, see our guide on boiler service prices.
A faulty boiler pump could be the cause of your home taking longer to heat up than usual or making strange noises from your central heating system.
You’ll need to get a professional to evaluate the pump and determine whether it needs to be replaced. It will cost between £200 and £300 to replace the pump if it is needed.
A faulty gas valve controls the flow of gas to the pilot light and the burner within the boiler. A seized gas valve, which can be readily freed for around £100, could be the cause of your heater not working properly.
If it is broken or cracked, though, you will have to pay for a replacement, which may cost between £300 and £350.
Through a heat exchanger, heat is transported from the gas to the water. You may need to have the heat exchanger replaced if you see any significant signs of degradation, such as cracks.
An experienced heating professional will cost between £400 and £500 to replace a heat exchanger.
You may require new radiators if you relocate your boiler. This will impact your financial situation. Installing a single-panel radiator should cost between £110 and £210. Installing a twin-panel radiator should cost between £140 and £240.
Installing a horizontal radiator should cost between £260 and £470, a vertical radiator should cost £280 to £440, a column radiator should cost £290 to £470, and a heated towel radiator should cost between £130 and £230.
Depending on the size of the radiator, installing a new radiator in your home can take anywhere from 1 to 2 hours (small, medium, or large).
A simple radiator will set you back between £70 and £90 to remove. A medium radiator will set you back between £90 and £110, while a large radiator will set you back between £110 and £130.
An old radiator could be disposed of using a skip or alternative waste disposal services such as a ‘Man and Van’ service.
Modern boilers normally last 15 years, but if they are serviced once a year and any necessary repairs or power cleaning are performed, they can survive even longer.
Older boilers may only last ten years and must be changed before their expiration date in order to meet statutory standards for central heating systems.
If you believe your boiler is getting old, you may want to consider replacing it.
The type of boiler you choose will impact the price of installation. For example, a new combi boiler costs between £1500 and £3500, while a traditional boiler costs between £1300 and £3700.
System boilers, which cost between £1500 and £2800, are another type of boiler. Biomass boilers range in price from £4000 to £9000, whereas condensing boilers cost between £2000 and £2500.
The cost of a new boiler is also decided by how long it takes to install it, as artisans often charge by the day or hour, depending on the project. Regular and combi boilers take one to one and a half days to install, while system boilers can take up to two and a half days.
Some tradespeople may demand a minimum cost when transporting a boiler. This might be a one-time fee for the first hour of labour, but just for short-term jobs like moving a boiler, or it could be a flat price that is added to the labour and, if applicable, supply expenses.
Location of Boiler
The location of a boiler is particularly important since the easier it is for a contractor to fix it, the more accessible it is. The longer the job takes in this case, the higher the labour costs are.
Of course, the contractor and the difficulty of reaching the boiler will influence this.
Type of Boiler
It’s also crucial to think about the type of boiler. Although moving an electric combi boiler or a commercial boiler is normally less expensive, an oil boiler service can be quite costly. The cost of relocating the boiler may be impacted by the boiler’s quality.
Condition of Boiler
The state of the boiler is also crucial. We’re not simply talking about the boiler’s original state; a boiler that has deteriorated dramatically over time may be more difficult to replace than a fresh, high-quality choice.
Number of Tradespeople
The number of professionals hired for the job can influence boiler maintenance costs. However, depending on the type of boiler, it may be necessary to move it with more than one person, which may increase the overall cost of the move because you will be paying double the labour.
The length of time it takes to finish the job may or may not influence the ultimate cost, depending on how the tradesperson works. A contractor will be paid a fixed amount up front in some cases, while they will be paid by the hour in others.
The more expensive it is to relocate a boiler, the larger it is. Of course, this isn’t always the case, but maintaining a larger boiler is often more difficult and time-consuming than maintaining a smaller, simpler type. This, however, is unlikely to be a major budgetary consideration.
Tradesmen Costs for a Boiler Relocation
It is critical to hire a tradesperson to transfer your boiler since they will do so carefully and professionally. As a result, if you’re considering relocating your boiler, consult with a gas professional about the ideal locations based on cost, boiler type, and available space. Make sure you also speak with your gas engineer.
What are the labour costs if no supplies or other charges are included? Here, we’ll go over the various prices that a tradesperson will charge you for moving your boiler.
Before transporting a gas boiler, you should get quotations from a Gas Safe licenced expert. In the United Kingdom, only these people are legally allowed to work on gas appliances.
Getting multiple quotes is a smart idea because different plumbers charge differently. However, the plumbers’ level of experience is also important to consider because it affects the pricing.
Depending on the plumber, their experience, and the difficulty of the job, a skilled plumber would charge between £40 and £60 per hour to transport a boiler.
Make sure the person you hire to move your boiler is exactly who you want them to be. A certified and qualified gas heating engineer, for example, must be registered with GasSafe.
Engineers can only register if they are suitably qualified, can install and repair heating and domestic water systems, and can respond to an emergency quickly and effectively.
The engineer’s registration card will have a photograph on the front, guaranteeing that you’re dealing with the appropriate person.
If you have any concerns regarding the safety of your new boiler installation or believe your engineer did a poor job, contact your engineer as soon as possible.
They must either fix any issues they produce or pay you for the expense of employing a new engineer. You shouldn’t be concerned if you’ve employed a Gas Safe engineer.
How Long Does It Take to Move a Boiler?
You will need to schedule time in your day to relocate your boiler. The time it takes to transport your boiler is determined by its size and location. As a result, we’ll go over the various time frames for relocating your boiler here.
It usually takes a whole day to move a boiler to a new location. The type of central heating system you keep in your home is now a consideration. In comparison to transferring a large system boiler from the garage to the attic, relocating a small combi boiler just takes a few minutes.
An engineer can normally transport a boiler from one site to another in two days. This includes tasks such as moving and lifting the boiler, as well as boiler installation, additional pipework installation, and flue installation.
When converting from a system boiler to a combi boiler, for example, replacing a boiler may take longer.
If your old boiler was in a different part of the house, you’d have to pay not only for additional pipes but also for labour to install it.
The pipes must also be relocated when a boiler is relocated, which accounts for the majority of the job’s cost. For a like-for-like deal, one day should be enough. If your new boiler is being carried over a long distance, it may take longer. If there are any complications, it can take a little longer.
It will take one day to install a new boiler in the same area as an existing heat-online boiler and a day and a half to install a new boiler in a new location to replace your old boiler.
It takes one day to replace a system boiler with an unvented hot water tank, two days to replace a heat-only boiler with a hot water cylinder, and three days to replace a system boiler with an unvented hot water tank.
If you don’t already have a central heating system, you’ll need to install more than just the boiler. Radiators and pipes must also be installed, which is a time-consuming and filthy process.
Depending on the configuration of your property, pipes may be found in the ceilings, under the flooring, or in the walls—or any combination of the above. If you’re installing a new system across the house, allow one to two weeks.
The time it takes to transfer a boiler is shown in the table below.
|Moving a boiler to a new location
|1 – 2 days
|Installing a boiler in the same area but replacing an old heat-online boiler
|Installing a new boiler in a new place to replace your old boiler
|Replacing a boiler with a system boiler and an unvented hot water tank
|Installing a new system across the house
|Up to 2 weeks
Benefits of Moving a Boiler
So you’re thinking about moving your boiler but aren’t sure if it’s worthwhile. As a result, we’ll go through the several advantages of transferring your boiler in this article.
Free Up Space
Wouldn’t it be better to put your boiler in a cupboard so you can use that space for something else? You might be able to free up space in a room that could otherwise be used for storage by relocating your boiler.
Stop Loud Noises
Maybe you’re in a communal room that gets a lot of use throughout the day, and the noise your boiler generates is getting to you. They’re all causing a commotion.
Moving your boiler to a different room could considerably lessen the amount of noise you experience during the day or night.
Few people consider boilers to be aesthetically pleasing, especially if they’re surrounded by exposed pipes. As a result, relocating a boiler can improve aesthetics and hot water speed and may be necessary for expansion.
Your boiler should be in a convenient position. It’s time to relocate if it’s continually getting in the way or making it difficult to access.
You must adhere to all applicable regulations and seek the assistance of a Gas Safe Registered engineer. This will provide the maximum level of security and comfort.
Q: What are the greatest locations to relocate a boiler?
A: In most circumstances, you can relocate your boiler to any of the following locations:
- Washing machine cabinet
- Utility area
- The cooking area
Unfortunately, in some cases, your options for relocating your boiler may be limited. This isn’t normally an issue with a combi boiler, but it can be with an immersion heater-equipped cylinder, a regular boiler, or a system boiler.
Q: Can I relocate a heater to the basement?
A: Gravity-assisted systems may prevent you from moving a standard boiler from the basement to the second floor. Because of these systems, the water tank must be elevated over the boiler.
The problem can be solved by moving the water tank to the attic, but this will increase the cost greatly. It takes a lot of effort to move a boiler downstairs.
Q: Is it possible to relocate a boiler to the loft?
A: Many homeowners choose to move their boilers to their attics. However, you must examine the implications of your decision. The loft space may need to be altered to create room for the boiler.
Boarding up the loft, adding frost protection to the boiler, installing a loft ladder, and ensuring that the wall can hold the weight of the boiler are all possible options. These and other upgrades will increase the project’s cost. Moving a boiler to the loft is typically a significant undertaking.
Q: Should I invest in a new boiler?
A: If your boiler is quite old and just has a few years left on its warranty, replacing it at the new location may be more cost-effective. You’ll have to pay for both the relocation and a new installation in a short period of time if you don’t.
- A boiler replacement may be the only alternative if parts for your boiler are hard to come by or too pricey.
- It’s also a good idea to think about how much money you’ll save by installing a new boiler. Boilers that are modern and energy-efficient can help you save money by using less fuel and providing a 10-year warranty.
- A potential repair for an elderly boiler that is nearing the end of its warranty period could cost hundreds of pounds. Remember that an old boiler is more likely to break down and require repairs, so purchasing a new boiler could save you money.
Q: How do I obtain a quote for the relocation of my boiler?
A: In the last 2-3 years, the popularity of delivering quotes online has risen, with major companies like British Gas now offering the option to buy a combi boiler online.
Some boiler manufacturers have even invested in online quoting tools to aid in the generation of work for their network of trained installers. Because the expert will not have visited the premises before the work begins, both will result in a boiler installation without a house visit.