Costs & Guides

• Instagram
• Facebook
• X
• Medium

What you need to know about sealing a shower will be shown in this guide. We’ll give you a step-by-step plan for how to do the job right and efficiently, along with a list of all the tools and supplies you’ll need.

Why Should I Seal my Shower?

This piece will tell you everything you need to know about shower sealing. We’ll give you a step-by-step plan for how to do the job right and efficiently, along with a list of all the tools and supplies you’ll need.

Putting new sealant on your shower is an easy and great way to make your bathroom look new again, especially if the old sealer is starting to look worn. If you put a sealer on your shower, it will also stay leak-free.

It will make the surface smooth and stop water from getting under the shower or into the walls, where it could damage the walls or grow mould.

The Right Way to Seal Your Own Shower

Step 1 – Clean surface

Check to see if the surface is clean, dry, and strong.

Step 2 – Remove old sealant

Next, use a pocket knife to cut through any old sealant in your shower and pull it off.

Step 3 – Clean the area

Clean the area and dry it with a cloth after taking off the old sealant.

Step 4 – Masking tape

Put masking tape on both sides of the joint to make a clean bead.

At the size of bead you want, cut the tip off the sealer cartridge at a 45-degree angle.

Step 5 – Apply sealant

Apply the glue with steady pressure using a caulking gun. Make sure the sealer goes all the way into the joint.

Step 6 – Smooth bead

Use your finger to spread the bead of sealer out.

Step 7 – 24 hours dry

As soon as you’re done, take off the masking tape from the joint and let the sealant dry. Before taking a shower, you should wait at least 24 hours.

What You Need to Seal a Shower:

• Caulking Gun
• Paper Towel
• Utility Knife

Safety Equipment to Seal a Shower

For sealing a shower, you don’t need any special safety gear.

Things you can use to seal a shower

• Sealant

Tips to Seal Your Shower

Before you start fixing your shower, you should clean the area and let it dry completely.

Also, you need to get rid of any old sealer. To do this, use a pocket knife to loosen it up and then peel it off.

Types of Sealant for Showers

You can fix your shower with a number of different types of sealant. What you need to know about the different types of popular shower sealer in the UK is shown below:

Acrylic Caulk

Another very popular type of shower sealer is acrylic caulk. There is a lot of it around because it’s cheap and easy to find at most DIY shops.

It’s a great glue, but it doesn’t always work as well as silicone. One reason this type of caulk is famous is that it costs less.

Coloured caulk

Should your shower be a colour other than white, you might want to find caulk that fits the colour of your shower.

This is a great place for coloured glue. Though it doesn’t cover as well as other types of caulk, it looks great on coloured showers.

Silicone sealant

One of the most famous types of sealant in the UK is silicone, which works especially well to keep showers sealed.

It’s very simple to use and does a great job of keeping your shower looking clean and stopping leaks.

Waterproof Caulk

When you’re shopping for a bathroom sealant, you should try to find one that keeps moisture out.

Even though most caulks are good at stopping leaks, even a small amount of water can be a big problem.

Waterproof glue can protect without breaking down after being in water for a long time. This is one reason why waterproof caulk is often used in baths.

FAQs